To close the menu without entering your new setting...
Pressing the OK button at Step 6 will register your new setting. If you wish to cancel,
you can do so at any time up to Step 6 by pressing the MENU button ( ).
What happens to settings at power-off?
Some RECORD-mode settings are lost when you turn the camera off, while others are
retained. For information about each setting, refer to the explanations later in this
chapter.
To change a menu setting temporarily...
If you wish to change a setting for one or several shots only, without registering the
change into memory, proceed as follows.
1 Follow steps 1 to 5 of the previous
procedure.
2 Compose and take the shot.
• Compose the shot while the menu is still on
the screen. The menu will disappear when
you half-press the shutter release button,
then reappear after you full-press to take the
shot. When the menu screen reappears you
can shoot again.
3 When you are finished with the temporary
setting, press the MENU button.
• The Shooting menu closes without
registering the temporary setting.
114
To Next Page
Loading...
