146
How to trim the movie
1 Select the frame that you wish to use as
the first frame of the movie.
: Move forward one frame.
: Move back one frame.
: Jump back to the beginning of the
movie.
: Jump to the last frame of the movie.
2 Press the OK button.
• The camera registers your selection. The
monitor prompts you to select the end
frame.
3 Select the frame that you want to use as
the final frame of the movie.
: Move forward one frame.
: Move back one frame.
: Jump back to the frame you selected
at step 2 above.
: Jump to the final frame of the movie.
4 Press the OK button.
• The camera registers your selection.
5 Select the appropriate action from the
menu, then press the OK button to execute
the action and close the menu.
NEW CREATE:
Saves the result as a new movie. The
untrimmed version also remains on the card.
OVERWRITE:
Saves the result and deletes the original
version (the trimmed-off frames).
CANCEL:
Cancels the entire operation. The original
movie remains on the card unchanged.
To Next Page
Loading...
