Correcting Blurry Images
In some cases the whole image may be blurred. In other cases, only the
objects surrounding the subject are blurred, while the subject itself is in
focus. Use the CAMEDIA Master 1.11 Sharpen when this happens to
sharpen the whole image. But please note: it doesn't wipe out blur
throughly.
Place the cursor on the image you want to correct and double-
click on it.
This will display the selected image.
Select [Image] - [Filter] - [Sharpen] of the menu bar.
Specify the degree of sharpness either by sliding the slide bar
or inputting the value 1 to 9, while comparing "Original" and
"New".
If the new image is good, press the [OK] button.
This will sharpen the selected image.
4
3
2
1
E-71
Processing Images on Personal Computer
E
1
2
3
To Next Page
Loading...
