E-77
Setting Camera’s System
E
Formatting SmartMedia/CompactFlash Memory Cards
The below procedure explains how to format SmartMedia and CompactFlash memory cards. Before using cards that have for-
matted by a personal computer or by a digital camera that we did not manufacture, please reformat them using the C-2500L.
If trouble occurs, reformat the card. When a card is reformatted, all data on it is erased.
Set the mode dial to .
Press the [SM/CF] button and select the card to format.
Press the [ ] button.
The first menu will appear on the LCD monitor.
Align the cursor with "SM SETUP" with the top/bottom point of
the jog dial.
Select with the right/left point of the jog dial.
Press the [OK] button.
The confirmation screen will be displayed.
Select "YES" with the left point of the jog dial.
Press the [OK] button.
Formatting will start.
8
7
6
5
4
3
2
1
NOTE
• When the write-protect adhesive seal is placed on the SmartMedia,
you can't format it.
• Formatting erases images that have been protected ( ).
4
7
Set Beeps
Beeps such as a warning beep can be set to be activated or not.
Set the mode dial to "P", "A", or "M".
Press the [ ] button.
The first menu will appear on the LCD monitor.
Align the cursor with using the top/bottom point of the jog
dial.
Select “ON” (the camera beeps) or “OFF” (the camera does not
beep) with the right/left point of the jog dial.
Press the [OK] button.
Beep activation will be set.
5
4
3
2
1
To Next Page
Loading...
