2
Press í.
● The two-in-one picture mode is set.
3
Take the first shot.
● The subject will be on the left in the
combined image.
4
Take the second shot in succession.
● The subject will be on the right in the
combined image.
● How to cancel the two-in-one picture
mode
T To cancel the two-in-one picture mode
after taking the first shot, press .
The first shot will not be stored.
TIPS
● You cannot take two-in-one (2 IN 1) pictures in the mode.
● During two-in-one (2 IN 1) shooting, the following functions are disabled:
– Panorama shooting
– Sequential shooting/AF sequential shooting
– Auto bracketing (BKT)
● Two-in-one (2 IN 1) pictures are saved in SHQ in the TIFF record mode.
To Next Page
Loading...
