You can adjust the amount of light emitted by the flash.
In some situations, you may get better results by adjusting light emission.
Examples include small subjects, distant backgrounds, or situations when
increased contrast is desired.
In the top menu, select MODE MENU T
CAMERA T . To increase the light
emission, press
Ñ. To decrease the light
emission, press
ñ. To complete the
setting, press .
~ “How to use the
menu” (P. 39)
Factory default setting: ±0
Ñ: Light emission is increased by a 1/3 EV each time you press the button.
ñ: Light emission is decreased by a 1/3 EV each time you press the button.
(EV: Exposure Value)
To Next Page
Loading...
