166
Chapter 8
Video output selection
You can select NTSC or PAL according to your TV's video signal type. Select
the video signal type before shooting. If you use the wrong video signal type,
you will not be able to play back the recorded images properly on your TV.
In the top menu, select MODE MENU T
SETUP T VIDEO OUT T NTSC or PAL.
Press . Press again to cancel the menu.
~ “How to use the menu” (P. 39)
● The factory default setting varies depending
on the area where you purchased this
camera.
TV video signal types & main regions
NTSC : Japan, Korea, North America, Taiwan
PAL : China, european countries
To Next Page
Loading...
