137
Chapter 7
Erasing pictures
Recorded pictures can also be erased. This can be done either one frame at
a time or to all the pictures in the card.
1
Select a picture you wish to erase by
using the arrow pad.
● If the picture is protected, cancel the
protection first (P. 136).
2
Press the (erase) button.
● The ERASE screen is displayed.
3
Press Ñ to select YES.
4
Press to erase the picture.
● To cancel erasing, select NO in step 3 and
press , or press the button again.
This function only erases the picture displayed on the monitor. Erasing further
pictures must be done one-by-one if using this function.
ERASE screen
● It is not possible to erase protected pictures or pictures stored on a card
that has a write-protect seal.
● Once erased, pictures cannot be restored.
To Next Page
Loading...
