30
Chapter 1
Selecting a language
1
Set the mode dial to P.
● Be sure to take the lens cap off before
you turn the camera on (P. 27).
2
Press .
● The monitor turns on automatically and
the top menu appears.
3
Press í on the arrow pad to select
MODE MENU.
4
Press ñ to select SETUP, then press
í.
● The items in the SETUP menu appear.
5
Press Ññ to select , then press
í.
● The available languages are displayed.
● Languages vary depending on the area of
purchase.
6
Press Ññ to select a language. Press
.
● The camera returns to the SETUP menu.
● If is pressed again, the menu will
disappear.
7
To turn the camera off, set the mode
dial to OFF.
Factory default setting: ENGLISH
Select a language for on-screen display. This reference manual shows the
English on-screen display in illustrations and explanations.
Available languages vary depending on the area where you purchased this
camera.
● The current settings are retained even when the power is turned off, unless
they are readjusted.
To Next Page
Loading...
