179
Chapter 10
External flash (Cont.)
2
Select M from “A/S/M/ mode
setting” (P. 48). Adjust the shutter
speed and the aperture (P. 55).
● Remember that a slow shutter speed
can produce blurred images. For the
best results, we recommend that you
set the shutter speed from 1/200 to
1/300 seconds.
3
Turn on the external flash.
4
Set the mode that automatically
controls the amount of light emitted by
the external flash. Also set ISO and
aperture on the external flash to match
the camera’s settings.
● See the user’s manual for the external
flash to select its modes.
● The camera's flash mode will have no effect on the external flash. The
external flash will fire even when the camera's flash mode is set to (off).
● Confirm in advance that the external flash you are using is synchronized
with the camera.
To Next Page
Loading...
