∑ Using AE lock
In the M or mode, multi-metering is not
available.
1
Compose the picture where you want
to lock the metered value (exposure),
then press the button.
● The monitor turns on automatically.
● To cancel AE lock, press the
button again and release it quickly. If
you want to lock a different exposure,
re-compose the picture and press the
button again. Each time you press the
button, lock and cancel are repeated.
2
Place the subject you want to focus on
within the AF target mark, then press
the shutter button halfway.
● The green lamp lights.
● AE lock cannot be canceled while the
shutter button is pressed halfway.
3
Press the Shutter button all the way.
● After shooting, AE lock is canceled and
AEL disappears.
To Next Page
Loading...
