Olympus CAMEDIA C-4000 Zoom - Page 94

93
Chapter 5
Sequential shooting (Cont.)
Under some conditions, you may obtain better results shooting with exposure
compensation than by using the exposure setting considered optimal by the
camera. When auto bracketing is set, exposure is changed automatically for
each frame when you start shooting. The exposure differential can be
selected in the menus. Focus and white balance are locked at the first frame.
Ex: When BKT is set to ±1.0, x3
Auto bracketing — Shooting pictures sequentially
with a different exposure for each frame BKT
Mode dial
setting
1
In the top menu, select MODE MENU
T CAMERA T DRIVE T BKT. Press
í.
~ “How to use the menu” (P. 39)
2
Press Ññ to select the exposure
differential between each frame (±0.3,
±0.7, ±1.0), then press
í.
Shutter button
button
Ññíbuttons
BKT
CANCEL SELECT
GO
0.7
0.3
x3
x5
1.0