13
Control panel indications
1 Flash intensity control (P. 89)
● Displayed when the amount of the light emitted by the flash is adjusted.
2 Spot metering mode (P. 91)
● Displayed when the Spot metering mode is set.
3 Self-timer (P. 93)
● Displayed when the self-timer is activated.
4 Sequential shooting (P. 96)
● Displayed when the drive mode is set to Sequential shooting or AF
Sequential shooting.
5 Remote control (P. 94)
● Displayed when remote control shooting is activated.
6 White balance (P. 112)
● Displayed when the White balance is set to any mode except AUTO.
7 ISO (P. 110)
● Displayed when the ISO is set to any mode except AUTO.
8 Card error (P. 32, 193, 194)
● When the power is turned on, the camera checks the card. If there is a
problem with the card, this indication appears.
9 Card writing
● Displayed when recorded pictures are being written to a card.
0 Record mode (P. 105) (TIFF, SHQ, HQ, SQ1, SQ2)
● Displays the record mode. If SHQ or HQ is set to ENLARGE SIZE, the
corresponding indication blinks.
! Macro mode (P. 92)
● Displayed when the macro mode is engaged.
@ Manual Focus (P. 73)
● Displayed when locking focus using the Manual focus function.
To Next Page
Loading...
