1
Set the mode dial to the desired
position.
2
Open the lens barrier.
● The camera turns on and the lens
extends.
● Startup image is displayed on the
monitor.
● If the lens does not extend, the lens
barrier is not fully open.
3
Partly close the lens barrier to turn
the camera off (about halfway across
the lens). Wait until the lens is fully
retracted.
● Do not push the lens barrier against the
lens.
● Shutdown image is displayed on the
monitor.
4
Close the lens barrier all the way.
● The power turns off.
1
Press the (monitor) button.
● The monitor turns on and startup image
is displayed.
● If the lens barrier is open, press
twice quickly to enter the playback mode.
2
Press the button again.
● Shutdown image is displayed on the
monitor, then the monitor turns off.
30
Power on/off
Chapter 1
(monitor) button
Shooting mode
Playback mode
Monitor
Lens barrier
Mode dial
To Next Page
Loading...
