Single-frame print reserve (Cont.)
5
In the screen, set x (number of prints), (date/time) and
(trimming). When setting is complete, press .
● A picture is played back.
Select x (number of prints)
or (date/time).
Increases the number.
Decreases the number.
To “Trimming setting”
(P. 164).
6
Press to display the top menu again (as in Step 4). Press É to
select END.
● The PRINT ORDER screen appears.
● To perform Print Reserve for more pictures, repeat steps 3 – 6.
7
Press É repeatedly until the PRINT ORDER screen disappears.
● The top menu appears.
8
Press to exit the top menu.
● Make sure that the Print Reserve mark, number of prints and date/time
are displayed on the selected images. If the number of prints is set to 1,
no number is displayed; is displayed instead.
To Next Page
Loading...
