83
Chapter 4
Zoom area
Zoom — Telephoto/Wide-angle
shooting (Cont.)
Indicates digital zoom
Indicates optical zoom
Digital zoom ON
The cursor moves on the zoom indicator
according to the zoom magnification.
● In the mode, you cannot use both the optical zoom and digital zoom.
● Images captured with the Digital Zoom may appear grainy.
● Camera movement is likely to happen at higher magnifications. Stabilize the
camera with a tripod, etc. to avoid camera movement.
Factory default setting: OFF
2
Press the zoom lever towards T.
● The monitor turns on.
● If the monitor turns off, the digital zoom returns to 1x.
● In the mode, the factory default setting of is OFF. During
movie recording, you can only use the optical zoom.
● Zoom in/out during (movie record) mode
When is set to ON in the menu during the mode, only digital zoom
can function while shooting. For this reason, it is necessary to select the
optical zoom magnification level by using the zoom lever before shooting.
● If DIGITAL ZOOM is set to OFF in the mode, zooming is not
possible.
TIPS
To Next Page
Loading...
