101
3
Setting Up
Adjust CCD and image processing functions
The Pixel Mapping feature allows the camera
to check and adjust the CCD and image
processing functions. This should be
performed once a year. Wait for about a minute
after taking a picture or playing back a picture
to allow for proper performance of the Pixel
Mapping function.
The camera was adjusted at the factory before shipment and does not need
to be adjusted immediately after purchase.
Press the OK/MENU button in
shooting mode.
The top menu is displayed.
Press d to go to [MODE MENU].
Press a or c to select the [SETUP]
tab.
Press d to go to the [SETUP] menu.
Press a or c to select [PIXEL
MAPPING].
Press d to go to the pixel mapping
settings.
F
WB
K
MODE MENU
W
CARD
ALL RESET
PW ON SETUP
COLOR
8
ENGLISH
NORMAL
LOW
CAM
ON
SETUP
SHUTTER SOUND
FILE NAME
PIXEL MAPPING
s
ON
RESET
REC VIEW
CARD
CAM
SETUP
To Next Page
Loading...
