Playback on a TV
61
2
Viewing
Press a or c to select [NTSC] or
[PAL] and press the OK/MENU
button.
The video signal system is set.
Press the OK/MENU button again to exit
the menu.
Turn the camera and the TV off.
Plug the AV cable into the A/V
OUT jack on the camera.
Plug the yellow plug and the
white plug of the AV cable into
the TV video (yellow) and audio
(white) input jacks respectively.
For information on your TV audio/video
input jacks, refer to your manual of the
TV.
NTSC
PAL
s
X
VIDEO OUT
G
8
CARD EDIT PLAY
SETUP
A/V OUT jack
Connector cover
To Next Page
Loading...
