AE lock
57
Advanced shooting functions
4
TIPS
To save the locked metered value (exposure) after shooting (AE memory)
→ After Step 1 or 2, hold down the [ button for more than 1 second.
C
appears. While C is displayed, the exposure is saved. Press the
[
button again to cancel AE memory.
AE lock was canceled.
→ Do not operate any of the buttons or the mode dial after performing AE lock.
Doing so will cancel AE lock.
→ The camera was reactivated from sleep mode or the monitor turned off when
power was turned off.
Note
• AE lock is not available when multi-metering is enabled. Select [ESP] or [5].
g“Metering” (P.54)
d4250_e_00_0_bookfile.book Page 57 Friday, December 24, 2004 11:45 AM
To Next Page
Loading...
