White balance
62
4
Advanced shooting functions
Top menu [MODE MENU] [PICTURE] [WB] [V]
g“Menus” (P.16)
1
Display the [ONE TOUCH WB]
screen and point the camera at a
sheet of white paper.
• Position the paper so that it fills the
screen, making sure there are no
shadows.
2 Press N.
• The white balance is set and the screen returns to the mode menu.
One-touch white balance
Note
• When setting the white balance by pointing the camera at a sheet of white
paper, the correct setting may not be obtained if the light reflected by the paper
is too bright or too dark.
• White balance may not be effective under some special light sources.
• After setting a white balance other than [AUTO], play back the picture and
check the colors on the monitor.
• When the flash is fired with a white balance setting other than [AUTO], colors
may appear different in the resulting picture from the colors you see on the
monitor.
Mode dial
CANCEL
GO
OK
OK
CANCEL
GO
ONE TOUCH WB
F2.8
1/1000
0.0
2592 1944
HQ
P
30
30
One-touch white balance
d4250_e_00_0_bookfile.book Page 62 Friday, December 24, 2004 11:45 AM