Editing movies
96
6
Playback
3 Select [OK] and press N.
• The [BUSY] bar appears and after the 9
frames extracted from the movie appear as
an index display, the camera returns to the
playback mode. The index is stored as a
new picture.
• To select different frames, select [RESET]
and press N. Repeat the procedure from
Step 1.
• To quit the editing function, select [CANCEL] and press N.
Top menu [MODE MENU] [EDIT] [EDIT] g“Menus” (P.16)
TIPS
• The index is stored as a still picture in a different record mode from the original
movie.
Note
• The interval between the frames that are automatically extracted varies
depending on the length of the movie.
• An index consists of 9 frames.
• You cannot create an index if there is insufficient memory space on the card.
Editing a movie
INDEX
OK
RESET
CANCEL
SELECT
GO
OK
SELECT GO
OK
Record mode when the movie was shot
Record mode when stored as an index
HQ
SQ2 (1,024 × 768 pixels: HIGH)
SQ
Mode dial
d4250_e_00_0_bookfile.book Page 96 Friday, December 24, 2004 11:45 AM
To Next Page
Loading...
