E
116
WHITE BALANCE
When you cannot obtain the right white balance with the auto
setting, there are four other presets available.
1 Press the Menu button in the Record mode, and select
White balance.
2 Select either Auto , Daylight , Overcast ,
Tungsten light or Fluorescent with the +/– buttons.
3 Press the OK button to confirm the setting.
● The Preset white balance mark appears on the control
panel when a setting other than auto is selected.
● Press the Menu button to cancel the setting and go to the
next setting menu.
◆ Select “Auto” in normal situations.
◆ The white balance will return to auto when the
lens barrier is closed.
◆ The presets may not work under special lighting.
Note:
To Next Page
Loading...
