E
178
Make sure that the power of the computer and the camera
are turned off and the lens barrier of the camera is closed
before connecting.
1 Connect the communication cable to the computer’s serial
cable as shown on the page 176.
2 Open the connector cover.
3 Align the arrow mark on the communication cable plug
with the camera’s connector. Insert the plug and push it in
as far as it will go.
4 Open the lens barrier to turn on the power.
USING A PERSONAL COMPUTER
◆ Do not connect when the power of the camera is
on as it may cause a camera malfunction.
◆ When the lens barrier is closed, the computer will
not communicate with the camera.
◆ AC adapter is recommended for computer
downloads.
Note:
Computer connector
Connecteur pour ordinateur
Connector para computadora
To Next Page
Loading...
