E
74
1 Open the lens barrier. Press the LCD monitor ON/OFF
button to turn on the LCD monitor.
● Press the button again to turn off the monitor.
2 Aim the camera by looking at the subject through the LCD
monitor.
● Take the picture in the same way as you would when using
the optical viewfinder. (p. 72)
Taking pictures using the LCD monitor
◆ Pictures that appear on the LCD monitor are for
composition purposes only. If you need to know
focus or exposure, check your computer’s
display.
◆ It is recommended to use the optical viewfinder
for less camera movement and battery
consumption.
◆ When the subject is viewed diagonally in the
camera, the edges may appear zigzagged on the
LCD monitor. This is not a malfunction; it will be
less noticeable in the Record mode.
◆ When a picture is taken in a lighted area, such as
in sunlight, vertical lines may appear on the LCD
monitor. This is not a malfunction.
Note:
To Next Page
Loading...
