48
3
Connecting to Your PC
.................................................................................................................................................................
Notes
• NEVER disconnect the USB cable while the record/play indicator lamp is flashing. If you do, the data will be
destroyed.
• Refer to the user's manual for your PC regarding the USB port or USB hub on your PC.
• Be sure that you connect the USB cable either directly to the USB port on your PC or the self-power (AC
adapter connection) USB hub.
• Be sure to push the cable connector all the way in. Otherwise, the recorder may not operate properly.
• Release the HOLD switch.
Macintosh
1
Move the icon of the recorder's drive displayed on desktop to trash box by drag
and drop.
2
Disconnect the USB cable.
Connecting to your PC using the cradle
Place the recorder on the cradle
1
Insert end A of the USB cable to your PC's
USB port or USB hub.
2
Connect the end b of the USB cable to the
cradle.
3
Make sure that the recorder is off, and place
it in the cradle.
1 Set the recorder vertically.
1
2
Connecting to Your PC
To Next Page
Loading...
