Olympus DM-901 - Turn the Power on; Setting the Date;Time

1
Setup
15
EN
Setup
Turn the power ON
1
While the voice recorder is turned
off, slide the POWER / HOLD switch
in the direction of the arrow.
POWER/HOLD
switch
NOTE
• Always charge a rechargeable battery
before using it for the first time
(☞ P.12).
Setting the date/time
1
Press the 9 or 0 button to
select the item to set.
2
Press the 2 or 3 button to
change the number.
• To change the setting of another item,
press the 9 or 0 button to move
the blinking cursor, then press the 2
or 3 button to change the number.
3
Press the ` OK button to finalize
the setting.
TIP
• If you press the `OK button during the
setup operation, the recorder will save
the items that were set to that point.
• You can change the clock display
format. See “Setting the date/time
[Time & Date]” (☞ P.71) for the
procedure.