34
EN
Shooting
2
1
Rotate the mode dial to ART.
• A menu of art fi lters will be displayed. Select a fi lter
using the rear dial.
• Use FG to choose an effect. The effects available
vary with the selected fi lter (Soft Focus Effect, Pin Hole
Effect, Frame Effect, White Edge Effect, Star Light
Effect, Color Filter, Monochrome Color, Blur Effect, or
Shade Effect).
• Press the Q button or press the shutter button halfway
to select the highlighted item and exit the art fi lter menu.
ART
13
ART
13
100
%
Vintage
2
Shoot.
• To choose a different setting, press the Q button to display the art fi lter menu.
• To maximize the benefi ts of the art fi lters, some of the shooting function settings are
disabled.
• If [RAW] is currently selected for image quality (P. 55, 88), image quality will automatically be
set to [YN+RAW]. The art fi lter will be applied to the JPEG copy only.
• Depending on the subject, tone transitions may be ragged, the effect may be less
noticeable, or the image may become more “grainy.”
• Some effects may not be visible in live view or during movie recording.
• Playback may differ according to the fi lters, effects, or movie quality settings applied.
Using [Partial Color]
Record only selected hues in color.
1
Rotate the mode dial to ART.
2
Select [Partial Color].
3
Highlight a type or effect and press the Q button.
• A color ring appears in the display.
100
%
ColorColor
Partial Color
4
Rotate the front dial or rear dial to select a color.
• The effect is visible in the display.
5
Shoot.
To Next Page
Loading...
