97
EN
Menu functions (Shooting menu)
4
Keystone correction and perspective control ( Keystone Comp.)
Use keystone correction for shots taken from the bottom of a tall building, or
deliberately exaggerate the effects of perspective. This setting is only available in
P/A/S/M modes.
1
Select [On] for [Keystone Comp.] in X Shooting
Menu 2.
18
mm
100
%
250 F5.6
P
2
Adjust the effect in the display and frame the shot.
• Use the front dial and rear dial for keystone correction.
• Use FGHI to choose the area to be recorded. The area cannot be changed
depending on the amount of correction.
• Press and hold the Q button to cancel any changes.
• To adjust aperture, shutter speed, and other shooting options while keystone
compensation is in effect, press the INFO button to view a display other than
keystone compensation adjustment. To resume keystone compensation, press the
INFO button until keystone compensation adjustment is displayed.
• The following may occur as the correction amount increases.
- The image will be coarse.
- The magnifi cation ratio for image cropping will be large.
- The crop position will not be able to move.
3
Shoot.
• To end keystone compensation, select [Off] for [Keystone Comp.] in X Shooting
Menu 2.
• When [D (Keystone Comp.)] (P. 68) is assigned to a button using Button Function, press
and hold the selected button to end keystone correction.
• Photos are recorded in RAW+JPEG format when [RAW] is selected for image quality.
• The desired results may not be obtained with converter lenses.
• Depending on the amount of correction, some AF targets may be outside the display area.
An icon (g, h, i or j) is displayed when the camera focuses on an AF target outside
the display area.
• The following is not available while keystone compensation is in effect.
Live bulb/live time/composite photography, sequential shooting, bracketing, HDR,
multiple exposure, digital tele-converter, movie, [C-AF] and [C-AF+TR] autofocus
modes, [e-Portrait] and ART picture modes, custom self-timer, High Res Shot
• If a focus distance is selected for [Image Stabilizer] or you are using a lens for which lens
info has been provided, the correction will be adjusted accordingly. Except when using a
Micro Four Thirds or Four Thirds lens, choose a focal length using the [Image Stabilizer]
option (P. 53).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
