Olympus E-M1 MARK II - Adjusting I-Enhance Effects (Effect); Setting the Color Reproduction Format (Color Space)

65 EN
Shooting
2
Adjusting i-Enhance effects ( Effect)
You can set the i-Enhance effect strength in picture mode (P. 61).
1
Press the Q button to display the LV super control
panel.
2
Use FGHI to select [Effect].
3
Use the front dial to select an option.
Effect
H
F + RAW
FullHD
sRGB
+0.8
A + 1
i-Enhance
G + 1
S - AF
F
250250 F5.6
1:02:031:02:03
10231023
0.00.0
100 %
Standard
+ 1 + 1
S
Normal
S-IS Auto
M-IS Auto
WB
Auto
ISO
Auto
Effect
r (Effect: Low)
Adds a low i-Enhance effect to images.
s (Effect: Standard)
Adds an i-Enhance effect between “low” and “high” to images.
t (Effect: High)
Adds a high i-Enhance effect to images.
Setting the color reproduction format ( Color Space)
You can select a format to ensure that colors are correctly reproduced when shot
images are regenerated on a monitor or using a printer. This option is equivalent to the
[Color Space] (P. 119) in Custom Menu.
1
Press the Q button to display the LV super control
panel.
2
Use FGHI to select [Color Space].
3
Use the front dial to select an option.
H
F + RAW
FullHD
sRGB
+0.8
A + 1
Natural
G + 1
S - AF
F
250250 F5.6
1:02:031:02:03
10231023
0.00.0
100 %
+ 1 + 1
S
Normal
S-IS Auto
M-IS Auto
WB
Auto
ISO
Auto
Color Space
Color Space
sRGB
This is the RGB color space standard stipulated by the International
Electrotechnical Commission (IEC).
Normally, use [sRGB] as the standard setting.
AdobeRGB
This is a standard provided by Adobe Systems.
Compatible software and hardware such as a display, printer etc.
are required for a correct output of images.
• [AdobeRGB] is not available in movie mode or with ART (P. 33) or HDR