Shooting
2
63
EN
Changing ISO sensitivity (ISO)
Increasing ISO sensitivity increases noise (graininess) but allows photographs to be
taken when lighting is poor. The setting recommended in most situations is [AUTO],
which starts at ISO 200—a value that balances noise and dynamic range—and then
adjusts ISO sensitivity according to shooting conditions.
1
Press F.
2
Rotate the front dial to choose an option.
AUTO
The sensitivity is set automatically according to the shooting
conditions. The maximum ISO sensitivity value and other auto ISO
settings can be adjusted using the [ISO-Auto Set] option in custom
menus (P. 111).
LOW, 200–25600 The sensitivity is set to the selected value.
To Next Page
Loading...
