Olympus E-M10 Mark III - Setting the Color Reproduction Format (Color Space); Changing the Brightness of Highlights and Shadows (Highlight&Shadow Control); Color Space; Highlight&Shadow Control

Shooting
2
84 EN
Setting the color reproduction format ( Color Space)
You can select a format to ensure that colors are correctly reproduced when shot
images are regenerated on a monitor or using a printer. This option is equivalent to the
[Color Space] (P. 112) in Custom Menu.
1
Press the u button in P/A/S/M modes.
• In B, ART, SCN, and Z modes, the display of the
LV super control panel is controlled via [K Control
Settings] (P. 110).
2
Use FGHI to select [Color Space], then press
the Q button.
3
Select a color format using HI and press the Q
button.
250250 F5.6
P
1023
1:02:03
sRGB
Natural
S - AF
N
FHD
60p
S
Normal
WB
Auto
ISO
Auto
M-IS
S-IS On
A
±
0
± 0.0
±
0
±
0
±
0
G
±
0
Color Space
Color Space
sRGB
This is the RGB color space standard stipulated by the International
Electrotechnical Commission (IEC).
Normally, use [sRGB] as the standard setting.
AdobeRGB
This is a standard provided by Adobe Systems.
Compatible software and hardware such as a display, printer etc.
are required for a correct output of images.
• [Adobe RGB] is not available in ART (P. 42) or movie mode (P. 53) or when
Backlight HDR is selected in SCN mode (P. 29) or HDR is selected in Z mode
(P. 36).
Changing the brightness of highlights and shadows
( Highlight&Shadow Control)
Use [Highlight&Shadow Control] to adjust the brightness of highlights and shadows.
1
Press the u button in P/A/S/M modes.
• In B, ART, SCN, and Z modes, the display of the
LV super control panel is controlled via [K Control
Settings] (P. 110).
2
Use FGHI to select [Highlight&Shadow
Control], then press the Q button.
250250 F5.6
P
1023
1:02:03
sRGB
Natural
S - AF
N
FHD
60p
S
Normal
WB
Auto
ISO
Auto
M-IS
S-IS On
A
±
0
± 0.0
±
0
±
0
±
0
G
±
0
Highlight&Shadow Control
Highlight&Shadow Control
3
Adjust brightness in shadows with HI and in
highlights with FG.
• Settings can be reset by pressing and holding the Q
button.
• Press the INFO button to view the mid-tone adjustment
display.
4
Press the Q button to save settings.
RESETRESET
Midtone
HighLight+5
Shadow - 5