Olympus E-M10 Mark III - Making Fi Ne Adjustments to White Balance (WB Compensation)

Shooting
2
79 EN
Making fi ne adjustments to white balance ( WB Compensation)
You can set and fi nely adjust the compensation values for both auto white balance and
preset white balance.
Before proceeding, choose a white balance option to which to make fi ne adjustments.
g “Adjusting color (WB (white balance))” (P. 70)
1
Press the u button in P/A/S/M modes.
• In B, ART, SCN, and Z modes, the display of the
LV super control panel is controlled via [K Control
Settings] (P. 110).
2
Highlight white balance compensation using
FGHI and press the Q button.
3
Use HI to choose an axis.
4
Choose a value using FG and press the Q
button.
WB
250250 F5.6
P
1023
1:02:03
sRGB
Natural
S - AF
N
FHD
60p
S
Normal
WB
Auto
ISO
Auto
M-IS
S-IS On
±
0
A
±
0
± 0.0
±
0
±
0
±
0
G
±
0
Auto x
White balance compensation
For compensation on the A axis (Red-Blue)
Move the bar in the + direction to emphasize red tones and in the – direction to
emphasize blue tones.
For compensation on the G axis (Green-Magenta)
Move the bar in the + direction to emphasize green tones and in the – direction to
emphasize magenta tones.
• Selecting [Reset] (basic) in Shooting Menu 1 does not reset the values selected.