17
EN
Preparation
1
Power on
1
Move the ON/OFF lever to the ON position.
• When the camera is turned on, the monitor will turn on.
• To turn off the camera, return the lever to the OFF position.
ON/OFF lever
Battery level
; (green): Camera ready to shoot.
(Displayed for about ten seconds
after the camera is turned on.)
: (green): Low battery
] (blinks red): Charge the battery.
Monitor
250250 F5.6
01:02:0301:02:03
3838
ISO-A
200
Wi-Fi
Camera sleep operation
If no operations are performed for a minute, the camera enters “sleep” (stand-by) mode to
turn off the monitor and to cancel all actions. The camera activates again when you touch
any button (the shutter button, q button, etc.). The camera will turn off automatically if
left in sleep mode for 4 hours. Turn the camera on again before use.
To Next Page
Loading...
