87
EN
Menu functions (Shooting menus)
4
Processing options (Picture Mode)
You can make individual adjustments to contrast, sharpness and other parameters in
[Picture Mode] (P. 70 ) settings. Changes to each picture mode are stored separately.
1
Select [Picture Mode] in W Shooting Menu 1.
j
4:3
D
1
2
Shooting Menu 1
Card Setup
Reset/Myset
Picture Mode
Image Aspect
Back
Set
Digital Tele-converter Off
j/Y/
2
Select an option with FG and press Q.
3
Press I to display settings for the selected option.
h i-aJ K g
Contrast
P. 71
Sharpness
P. 71
Saturation
k
P. 71
Gradation
P. 72
Effect (i-Enhance. Set level of enhancement)
kk
k
B&W Filter (Monotone)
kk
P. 72
Pict. Tone (Monotone)
kk
P. 73
% Tips
• You can reduce the number of picture mode options displayed in the menu.
g [Picture Mode Settings] (P. 102)
Cautions
• Changes to contrast have no effect at settings other than [Normal].
Image quality (K)
Select an image quality. You can select a separate image quality for photographs and
movies. This is the same as the [K] item in live control. g “Selecting image quality
(still image quality mode)” (P. 61), “Selecting image quality (movie image quality mode)”
(P. 62)
• You can change the JPEG image size and compression ratio combination, and [X] and
[W] pixel counts. [K Set], [Pixel Count] g “Combinations of movie image sizes and
compression rates” (P. 116)
• You can change the combination of movie compression format/frame rate, the shooting
time of movie clips, and the effect of slow/quick motion shooting. g “Movie Specifi cation
Settings” (P. 108)
To Next Page
Loading...
