68
EN
Shooting
2
Peaking Each press of the button switches the monitor between
display/non-display. When Peaking is displayed, histogram
and highlight/shadow display are not available.
When using Peaking, you can change colors and emphasis by
pressing the INFO button.
AF Stop Stops autofocus.
j/Y
Choose a sequential shooting or self timer option.
#
Choose a fl ash mode.
HDR Switches to HDR shooting with the saved settings.
BKT Turns on BKT shooting using stored settings.
Multi Function Press the button to recall the selected multi function*. When
switching recalled functions, press the button while turning the
dial. g “Multi-function button” (P. 68)
GLock (Touch panel
lock)
Press and hold the button to enable and disable touch panel
operation.
Electronic Zoom When using a lens with a power zoom function, after pressing
the button, use the arrow pad for zooming operations.
u (Monitor switching)
Press this button to switch between displaying/hiding the
preview. If the eye sensor is disabled, it switches between
monitor display and EVF display.
V Level Disp
Press the button to display the level gauge and press it again
to turn off the level gauge. The level gauge is available when
[Style 1] or [Style 2] is set in [Built-in EVF Style].
* Multi function: b (Highlight&Shadow Control), c (Color Creator), e (ISO sensitivity/
White balance), f (White balance/ ISO sensitivity), a (Magnify), d (Image Aspect)
Multi-function button (Multi Function)
When framing pictures in the viewfi nder, you can adjust settings quickly using the
multi-function button. At default settings, the Fn2 button is assigned the role of the
multi-function button.
Choosing a function
1
Press and hold the button to which the multi-function
has been assigned and rotate the dial.
• The menus are displayed.
P
Highlight&Shadow Control
2
Keep rotating the dial to select the desired function.
• Release the button when the desired function is selected.
To Next Page
Loading...
