Automatic Activation/Deactivation
Activating/Deactivating of the CADe Application
How to Enable ENDO-AID CADe to Activate Automatically
To set an automatic activation of the CADe application when
the scope is connected, navigate to the section “Auto ON/OFF”
in the menu setting
1
. Select “When scope is connected”
2
and save the changes
3
. Do the same for the option “CAD
auto OFF” so that the system turns off when the scope is
disconnected.
The CAD icon is visible when the CADe
application is active.
A CAD icon with a cross indicates that the
application is in standby — for example, when NBI
or RDI is active. As soon as the user goes back
to WLI or TXI, the CADe application will switch on
automatically.
1
2
3
A window in the left part of the screen
indicates when Target Mode is on.
To Next Page
Loading...
