Users Can Select Their Preference
Two Visualization Modes
Advantage:
Less distraction during the procedure — thanks to a clear
endoscopic image.
Normal Mode
Advantage:
Feedback directly on the main image.
Target Mode
Findings are surrounded by a marker
directly on the endoscopic image
Flags announce detection by highlighting
the corners on the endoscopic image
Findings are surrounded by
a marker in a subimage
The application is thought to be operated preferentially in Normal Mode. If the users want a better visualization of a certain marker, they will shortly
toggle to Target Mode per default; the system will then return back to Normal Mode a few seconds afterwards.
Users willing to use Target Mode preferentially should select “unlimited” as the “Target Mode duration” option of the “Marker/flag” settings menu.
NOTE: The system will start in Normal Mode every time even if it was switched off in Target Mode.
To Next Page
Loading...
