Olympus SZ2-STS User Manual

INSTRUCTIONS
SZ2-STS/SZ2-STB1
SZ2-STP/SZ2-STB2
SZ2-STB3
Arms Used with Microscopes for
Equipment Mounting
A X 7 2 6 6
This instruction manual is for the Olympus Arms Used with Microscopes for Equipment Mounting. To
ensure the safety, obtain optimum performance and to familiarize yourself fully with the use of this
equipment, we recommend that you study this manual thoroughly before operating the system.
Retain this instruction manual in an easily accessible place near the work desk for future reference.

Olympus SZ2-STS Specifications

General

Brand	Olympus
Model	SZ2-STS
Category	Laboratory Equipment
Language	English

Summary

Modules and Nomenclature

Arm for SZX Stand SZ2-STS

Details the SZ2-STS arm for SZX stands, including its components and features like the equipment mounting hole.

Bonder Arm SZ2-STB1

Describes the SZ2-STB1 bonder arm, listing its parts like retaining screw, equipment mounting shaft, and focus adjustment knob.

Prober Arm SZ2-STP

Outlines the SZ2-STP prober arm, showing its retaining screws, Allen wrench, and equipment mounting screw hole.

Bonder Arm SZ2-STB2

Details the SZ2-STB2 bonder arm, its equipment mounting hole, clamping knob, and focus adjustment knob.

Bonder Arm SZ2-STB3

Presents the SZ2-STB3 bonder arm, including its equipment mounting hole, clamping knob, and LSGA mounting section.

Assembly Instructions

Mounting on the Equipment

Instructions for mounting the microscope arms onto the equipment, covering SZ2-STS/STB2/STB3 and SZ2-STB1 models.

Attaching the Microscope Frame

Steps for attaching the microscope frame to the arms, detailing SZ2-STS/STB1/STB3 and SZ2-STP/STB2 models.

Attaching the LSGA Illuminator

Guide on attaching the LSGA illuminator to specific SZ2 models, noting limitations for SZ2-STB2 and SZ2-STP.

Adjusting the Focus Adjustment Knob Tension

Procedure for adjusting the tension of the focus adjustment knobs for optimal ease of use and stability.

Specifications Overview

SZ2-STS and SZ2-STB1 Specifications

Details specifications for SZ2-STS and SZ2-STB1 models, including mounting methods, focus, illuminator attachment, and weight.

SZ2-STB2 and SZ2-STP Specifications

Details specifications for SZ2-STB2 and SZ2-STP models, covering mounting, focus adjustment, illuminator, and weight.

SZ2-STB3 Specifications

Provides specifications for the SZ2-STB3 model, including microscope attaching method, focus adjustment, and mounting.