Olympus SZ2-STS - Specifications Overview; SZ2-STS and SZ2-STB1 Specifications; SZ2-STB2 and SZ2-STP Specifications

SZ2-STS/STP/STB1/STB2/STB3
8
SPECIFICATIONS
Item Specifications
Model SZ2-STS SZ2-STB1
Microscope attaching method
Insertion (attaching hole diameter 76 mm). Attaching using a clamping knob.
Focus adjustment
Ball guide system, up/down movement with rack & pinion.
Focus adjustment stroke 50 mm
Focus adjustment knob tension adjustable.
Illuminator (LSGA) attaching method Possible using an LSGA attaching holder (IHA or IHD).
Mounting on the equipment Insertion (attaching hole diameter
32H8 mm).
Mounting using a clamping knob.
Load up to 7 kg.
Insertion (attaching shaft diameter
15.8 f8 mm).
Microscope attaching angle adjustable.
Load up to 7 kg.
Weight Approx. 1200 grams Approx. 900 grams
Model SZ2-STB2 SZ2-STP
Microscope attaching method
Insertion (attaching hole diameter 76 mm).
Clamping using three hex-socket retaining screws (using the provided Allen wrench)
Focus adjustment
Ball guide system, up/down movement with rack & pinion.
Focus adjustment stroke 45 mm
Focus adjustment knob tension adjustable.
Mounting on the equipment
Insertion (attaching hole diameter
24.5 mm).
Mounting using a clamping knob.
Load up to 7 kg.
Attaching using three or more hex-socket
screws (M4x10).
(Four mounting holes)
Load up to 7 kg.
Weight
Approx. 800 grams Approx. 500 grams
+0.2
0
+0.039
0
--0.016
--0.043
+0.2
0
+0.06
+0.01