To Next PageTo Next PageWhat to do if Olympus Laboratory Equipment 72DL PLUS gauge does not start after software update?
If your Olympus Laboratory Equipment 72DL PLUS gauge fails to start after a software update, it might be due to an interrupted, incomplete, or corrupted software update. To resolve this: 1. Remove the battery and disconnect the AC line power. 2. Reinstall the battery. 3. Restart the unit.
Why is the calibration function unavailable on my Olympus 72DL PLUS?
The calibration function might be unavailable on your Olympus Laboratory Equipment because it has been locked. To fix this, deselect Calibration in the Password Lock screen.
General| Pulser | Square wave pulser |
|---|---|
| Display | Backlit LCD |
| Operating Temperature | -10°C to 50°C |
| Data Storage | Internal memory |
| Battery | Rechargeable |
| Measurement Range | Up to 30 meters in steel |
| Resolution | 0.001 mm |
| Operating Frequency | 2.25 MHz to 30 MHz (depending on transducer) |
| Battery Type | Lithium-ion |
| Storage Temperature | -20°C to 60°C |
| Interface | RS-232 |
Defines the product's proper application and limitations.
Guidance on safe and effective product usage.
Details compatible peripherals and power sources for the gauge.
Warns against user servicing and unauthorized changes to the instrument.
Explains warning symbols found on the instrument and manual.
Defines signal words like DANGER, WARNING, CAUTION.
Explains signal words like IMPORTANT, NOTE, TIP.
General safety precautions before operating the instrument.
Lists general warnings and safety advice for instrument operation.
Safety guidelines for handling and disposing of batteries.
Instructions for proper disposal of the equipment.
Compliance with European directives.
Compliance with UK regulations.
Guidelines for waste electrical and electronic equipment disposal.
Information on restricted substances in Chinese electronics.
Regulatory compliance for South Korea.
EMC compliance for South Korea.
Compliance with electromagnetic compatibility directives.
Regulatory compliance for the USA, FCC rules.
Regulatory compliance for Canada.
Details on the product warranty and terms.
Information on obtaining customer and product support.
Steps to unpack the instrument and accessories from the case.
Lists standard accessories included with the 72DL PLUS gauge.
Identifies key components of the 72DL PLUS gauge.
Locates and identifies external connection ports on the gauge.
Details the LEMO connectors for transducers and their usage.
Describes the BNC connector for high-frequency transducers.
Explains the purpose of the 19-pin connector for accessories.
Identifies the connector for the AC charger or adapter.
Shows the location and access to the battery compartment.
Details the digital I/O connectors for data transfer.
Explains the use of USB A ports for storage devices.
Describes the USB Mini-B port for PC connectivity.
Details the Micro HDMI port for external display connection.
Identifies the locations for attaching harnesses or straps.
Explains how to connect the chest harness to the gauge.
Describes how to attach the shoulder strap to the gauge.
Locates and identifies the front panel controls.
Explains the function of the power button.
Describes the status of the power indicator light.
Explains the Function key for customization.
Describes the Play/Pause key function.
Explains the Calibration key function.
Describes the Save/Send key function.
Explains the Home key function.
Describes the function of the adjustment knob.
Steps to power on the 72DL PLUS gauge.
Steps to power off the 72DL PLUS gauge.
Instructions for connecting the AC power supply.
Steps to open the data port cover.
Procedure for replacing the instrument's battery.
Guidelines for cleaning the 72DL PLUS gauge.
Checks for seals to maintain hardware protection.
Recommendation for annual calibration services.
Common issues and solutions for the instrument.
