10-014357-01EN, Rev. 2, January 2022
Operation 37
2. Press the Save/Send key ( ) to save a measurement after it is taken.
3. Tap Yes in the Start New Inspection dialog box (Figure 3-3 on page 37).
Figure 3-3 Start New Inspection dialog box
The 72DL PLUS gauge automatically generates an inspection data file and the
measurement is saved to that file (Figure 3-2 on page 36).
3.2 Turning Off the Instrument
To turn off the instrument
1. Press the Power key ( ) to turn off the 72DL PLUS gauge.
On the touch screen, the Shut Down dialog box displays (Figure 3-4 on page 37).
Figure 3-4 Shut Down dialog box
2. Tap OK.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
