10-014357-01EN, Rev. 2, January 2022
Chapter 338
3.3 Connecting the AC Charger/Adapter
Connect the AC charger/adapter directly to the 72DL PLUS precision thickness gauge
to power it. When a Li-ion battery is installed in the gauge, and the AC
charger/adapter is connected, the battery charges until full. Note that the AC
charger/adapter is intended for indoor use only.
To connect the AC charger/adapter
1. Plug the DC power plug into the DC power connector on the 72DL PLUS gauge
(Figure 3-5 on page 38).
Figure 3-5 Connecting the DC power plug
2. Insert the AC power cord into the AC charger/adapter (Figure 3-6 on page 39).
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
