50
Safe use of neutral electrodes
Baby neutral electrode function
If the baby neutral electrode function is set to [ON], then each time a neutral electrode is
plugged to the ESG-410, the message box [Baby neutral electrode is selected] is displayed.
This is to prevent that the warning message regarding excessive current comes up when
working with neutral electrodes that are not for newborns.
6.6.1 Connecting a neutral electrode with a pre‑attached cable
● Insert the plug of the neutral electrode into the neutral electrode socket on the front
panel of the electrosurgical generator.
6.6.2 Connecting a neutral electrode without a pre‑attached cable
To connect a neutral electrode without a pre-attached cable also refer to the instructions for
use of the connecting cable and of the neutral electrode.
NEUTRAL
To Next Page
