83
After use
9 After use
This chapter describes the necessary steps to disconnect the electrosurgical generator and
all accessories.
Disconnecting
After use, disconnect the electrosurgical generator from the mains electricity and disconnect
all accessories from the electrosurgical generator.
1. Switch off the electrosurgical generator by pressing the power switch.
► The light of the power switch and the touchscreen turn off.
2. Disconnect all instruments from the corresponding output sockets.
3. Disconnect the connecting cable of the neutral electrode from the neutral electrode
socket.
4. Disconnect the power cable from the mains electricity.
5. Disconnect the foot switches from the socket at the back panel of the electrosurgical
generator.
To Next Page
Loading...
