Olympus IMT-2 - Assembly

Remove the adhesive tape that locks the light path selector knob in transit. The diagram below illustrates the
sequential procedure of assembly. The numbers indicate the assembly order of various components.
It Remove dust caps before mounting components.
CD Eyepiece
(i) Long working
distance condenser
0’ Ultra long working
distance condenser
0 Socket and
cord assembly
0 Halogen bulb
@ Filter
0
Lamp housing
4
Stage clip
k
@ Objective
!!3
L
+ I
0 Cross-move- 11
0’ Stage insert plate
,
0’ Plain stage
+
I
0
o’y, ~
n. I.
R
4 A
ment stage
ii!
I
@35mm camera
back
-1
@Adapter for
photomicrographic
attachment
@“Extension plate L
lr -
Allen@ wrench
0” Mechanical stage
attachment
Cm Hand rest )
m Pnrnmr r.r\rA
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com