34
4 Basic operation
1 Select the folder of the save destination.
See "4.3 Switching the folder from the live screen" (P. 31) for details about operations.
2 While a live image is displayed, long-press the [FRZ/REC] button.
The name of the folder in which to save images appears.
3 Check the name of the folder, select [YES] and short-press the [MEAS/ENTER]
joystick.
If you want to change the folder, select [MODIFY], change the folder of the save destination and
short-press the [MEAS/ENTER] joystick.
6 Select the strings in the preset title list registered in advance, and short-press
the [MEAS/ENTER] joystick.
This records the still image.
The screen shows "STILL" during recording a still image. The screen goes black for a moment
and then the frozen image is displayed.
● Setting "OFF" in the "FILE NAME MARK" menu enables to record the image immediately after operating
Step 3.
● The recorded still image can be measured in some cases. For details, refer to "6.7 Measurement" (P. 63).
NOTE
Recording a movie image
To Next Page
Loading...