To Next PageTo Next PageWhat to do if I get an E314 Foot switch error on my Olympus MAJ-2301 Switch?
If you're encountering an E314 Foot switch error on your Olympus Switch, it means the remaining battery power is low. Replace all the batteries with brand-new ones. If replacing the battery is not possible, use the wired control.
What does E315 Foot switch error mean on Olympus MAJ-2301?
If you are getting an E315 Foot switch error on your Olympus Switch, it indicates low quality of wireless communication. Try decreasing the distance between the foot switch and surgical microscope. Remove any obstacles. Move any equipment emitting radio waves further away. If the problem persists, use the wired control. Also, ensure the foot switch is within the recommended use range.
What does E338 Foot switch error mean on Olympus MAJ-2301?
If you encounter an E338 Foot switch error on your Olympus Switch, it means a switch on the foot switch has been depressed since the surgical microscope was turned on, or a switch has failed. Check that none of the switches are unintentionally pressed and that all switches function correctly. Release any pressed switch. If a switch doesn't work even when a function is assigned, stop using the foot switch.
What does E226 Foot switch error mean on Olympus MAJ-2301?
If you're seeing an E226 Foot switch error on your Olympus Switch, it indicates the foot switch is activated improperly or its circuitry may have failed. Set the foot switch setting of the surgical microscope to OFF.
Why is wired control unavailable on my Olympus MAJ-2301 Switch surgical microscope?
If you're experiencing issues with wired control of your Olympus Switch surgical microscope, check the following: Ensure the wireless unit is properly connected. Verify the foot switch cable is properly connected. Confirm that the foot switch setting of the surgical microscope is set to ON. Make sure the foot switch is installed on a level, stable surface. Ensure a function is assigned to the pressed switch. If the switch needs to be held, press and hold it for the required period.
Why won't the indicators light up on my Olympus Switch?
If the indicators on your Olympus Switch will not light or flash, it could be due to several reasons: * Batteries are not inserted. * Batteries are inserted in the wrong orientation. * The foot switch failed. Insert batteries. Insert batteries in the correct orientations. Set the foot switch setting of the surgical microscope to OFF.
What to do if functions activate unexpectedly on Olympus MAJ-2301?
If functions of the surgical microscope are unexpectedly activated with your Olympus Switch, it's possible that an unused foot switch is paired and its switch is being pressed. Store the unused foot switch so that its switches are not pressed.
Details on labels and symbols found on the foot switch unit.
Details on labels and symbols found on the wireless unit.
Details on labels found on the back cover of the instruction manual.
Specifies the intended application and required qualifications for operating the instrument.
Information on how to use the manual and definitions of key terms used.
Guidance on compatible equipment and safety precautions for repair and modification.
Explanation of warning signals and general safety precautions for instrument handling.
Explains the process and purpose of pairing the foot switch and wireless unit.
Describes how to connect the foot switch using a cable for operation.
Instructions for matching all items received in the package against the list.
Identifies and explains symbols and parts on the foot switch.
Identifies and explains symbols and parts on the wireless unit.
Describes the foot switch hanger and its components and usage.
Details the foot switch cable, its connectors, and markings.
Explains the purpose and application of pairing stickers for wireless connection.
Important warnings and precautions before installing and connecting the instrument.
Outlines the step-by-step process for installing the instrument and related equipment.
Detailed steps for physically attaching the wireless unit to the surgical microscope.
Instructions on how to mount the foot switch hanger onto the surgical microscope.
Step-by-step guide for installing batteries into the foot switch correctly.
Procedure for establishing a wireless connection between the foot switch and wireless unit.
How to configure the functions assigned to the foot switch buttons.
Proper procedures for storing the foot switch when not in use.
Safety warnings and general advice before performing instrument inspections.
Guides the user through the necessary inspection steps before operation.
How to verify the remaining battery power for wireless operation.
Procedure to inspect the foot switch cable for wired operation.
Confirms that all foot switch functions, including buttons and joystick, are working correctly.
Important safety guidelines and warnings during instrument operation.
Instructions and considerations for controlling the instrument wirelessly.
Instructions and considerations for controlling the instrument using a cable.
Procedures for cleaning and maintaining the instrument to ensure longevity.
Instructions for storing the instrument when it is not in use.
Guidelines for disposing of the instrument and its accessories according to regulations.
General advice on handling suspected irregularities and safety warnings.
A table listing common issues, their causes, and recommended solutions.
Guidance on interpreting and resolving specific error codes displayed by the system.
Lists recommended equipment that can be used with this instrument.
A diagram illustrating the system configuration and interconnected components.
Details operating, storage, and transportation environmental conditions.
Provides detailed technical data, dimensions, power, and connectivity.
Manufacturer's declaration on electromagnetic emissions and their impact.
Manufacturer's declaration on electromagnetic immunity and safe usage environments.
General