Instrument Nomenclature and Functions
1
1.2 Front Panel
11
K SOURCE/MEMORY button
Press to switch the image to be displayed on the
monitor. Each press switches the memory image
and the source image alternately.
L MULTI PICTURE button
In normal display, press to select the number of
images to be stored in a memory page for multi-
picture printing. After the first press, the current
setup is displayed for a few seconds. Further
presses vary the setup in cycle of 1, 2, 4, 8, 1,….
M STOP button
Press to stop continuation printing. Printing is
completed when the present printing is completed.
N PRINT QTY button
Press to set the number of prints up to 10. After the
first press, the current setup is displayed for a few
seconds. The print quantity can also be changed in
the middle of printing by pressing this button.
O CAPTURE button
Press to store the image in the memory of this
instrument.
P PRINT button
Press to start printing.
Q Paper exit
The printed sheets are output here.
R Paper tray
Print sheets are kept in this tray.
S Remote sensor
When using the provided Remote Control Unit
(MAJ-898) for wireless remote control of this
instrument, point the remote transmitter on the top
of the Remote Control Unit to the remote sensor.
T ALARM lamp
Lights in amber in case of an error such as paper
jam.
U PRINT lamp
Lights during printing.
To Next Page
Loading...