Inspection Before Use
3
3.1 Setup of Connected Equipment
26
OTV-SX2C No setup required.
EU-M60 “6.3. Setup”:
“System setup – Scope
switch”
Scope switches
“U1(F) switch”
“U2(R) switch“
“U3(S) switch“
“Release”
“Save & release”
Select the functions to be controlled from the
scope switches on the ultrasound endoscope.
Select any setting, as required.
“6.3. Setup”:
“System setup – Remote
control”
“REMOTE PRN2” “Color video
printer”
Select the type of the storage device to be
remote controlled.
Be sure to set this item to “Color video
printer” when using this instrument.
EU-C60 “6.3. Setup”:
“Setting up a video printer”
“printer” “on” Select whether or not the video printer is used.
Be sure to set this item to “on” when using this
instrument.
Table 3.1
Connected
equipment
Instruction Manual
references
Setup Item Setup Note
To Next Page
Loading...