Olympus OM-2 - Page 73

_ M _ A _ C ~ R ~ O ~ P _ H _ O _ T _ O _ G _ R _ A _ PH ~ Y ~ G _ RO _ U ~ P __ U _ NI _ T _ S ~~~~ ________ ~I ~
• Close-up Lens 49mm f=40cm
• Close-up Lens 55mm f=40cm
Available in both 49mm and 55mm
diameters to fit all suitable OM System
lenses. The use of them reduces the
minimum focusing distance of a stand -
ard l ens from 45cm (17.7") to 19cm
(7.5 " ) from the front lens surface .
00
C>
• Handy Copy Stand
A four - legged stand for close-up and
c opy photography . The leg length is
adjustable to three positions .
• Adapter Ring 55 -+ 49mm
Connects the standard F 1.2 to the
Handy Copy Stand or the reversed
55mm dia. lenses to the Auto Bellows .
• Extension Tubes 7,14 and 25
Bayonet mount tubes fitting · between
the OM Body and the lens . They have
extension of 7mm, 14mm and 25mm
respectively , and can be used in total
of 7 different combinations to give a
variety of magnifications . When used
with the standard F 1.S the lens - to-sub -
wi
ject distance can be changed from
39.1cm to 6 . Scm (15.4" to 2.7").
With the Macro 50mm, the Extension
Tube 25 provides an extended magnifi ·
cation range between O. 5x to life - size .
(I n this range, however , the 1: 1 Macro
SOmm is recommended for the best re -
sult . )
72
• Copy Stand
A standard type stand, 4S x 44 cm , for
general close - up and copy photo -
graphy . Two additional lights c an be
constructed to the top of the SOcm
high stanchion . Fine adjustment for
the camera height and a locking device
are provided .
1-· ··
"-
,
• Lighting Set
Complete with two units each consist -
ing of a stable base and a light arm .
Maximum light intensity is 500W .
• Table Clamp
Convenient for setting up the column
of the Copy Stand at the edge of a
nesk or table without the baseboard .